R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 05-03-2004 | 07:08 AM
  #7722  
crimson eagle's Avatar
crimson eagle
Tech Fanatic
 
Joined: Jun 2003
Posts: 841
From: Nor Cal
Default

Thanks for your input, I'm running pinks and purples, good size. I think I had too firm a center spring (red) I have a softer one which I'll try. I was running the blue side springs I'm going to change to orange and see. I have modified and cut the chassis down rev4 ish. I'm running lots of ride hieght also.

What should my castor be? currently I cut my front old stlye blocks down with 2 degrees on. The new stlye front end, do you mean the V-force? or the associated thing? (never used it before).

I'm in Northern California, it's pretty hot and my Paragon is gone by the 4th minute. By this time, I'm pushing badly on my way into the corner and when I hit the throttle on the way out, it's spin out city, as far as I can tell, I have the worst of both worlds.

Any thoughts about damper juice?

Finally what about the low roll centre cones? even if they won't work can someone tell what they do, I know they come with the rev4 kit.

Thanks for your help guys, it's annoying to drive so badly, I'm pretty good on carpet and not happy being at the back of the grid.

Last edited by crimson eagle; 05-03-2004 at 10:39 AM.
crimson eagle is offline