R/C Tech Forums - View Single Post - 3.5mm bullets to 4mm bullets
Thread: 3.5mm bullets to 4mm bullets
View Single Post
Old 02-03-2011 | 08:36 PM
  #2  
crusey_aus
Tech Master
iTrader: (3)
 
Joined: Jul 2008
Posts: 1,465
From: Melbourne, Australia
Default
Will be fine to shorten the motor wires

If its temporary you can use 3.5 / 4mm adapters, they work well

http://www3.towerhobbies.com/cgi-bin...?&I=LXPHD9&P=7


Cheers
crusey_aus is offline  
Reply