R/C Tech Forums - View Single Post - 8ight-E 2.0 Motor and Voltage options
View Single Post
Old 02-01-2011, 01:25 PM
  #14  
Edumakated
Tech Elite
iTrader: (19)
 
Join Date: Dec 2007
Location: Chicago, IL
Posts: 2,855
Trader Rating: 19 (100%+)
Default

Originally Posted by reracer
I think you need to understand that there isn't a huge difference in weight, performance or runtime between a 2050kv motor on a 5000mah 4s and a 1400kv motor on a 3300mah 6s. The batteries have just about the same amount of energy in them and they weigh almost exactly the same. Yes, the 6s system is slightly more efficient, but not much.

To get better run times find a more efficient, lighter weight motor and shave some weight off of your car. I run an inexpensive Leopard 1900kv 4060 motor that's about 60g lighter than a Tekin buggy motor. I get about +15min of run time with a 3300mah 4s Turnigy 35-70c (360g) with very little heat buildup. My car weighs 7.2 race ready.

Also make sure your drivetrain is super smooth. Drivetrain drag = waisted energy. Lastly, I think that lighter wheels and tires make a huge difference in run times also.

Just my .02

Agree on the weight and run time.... see my 810e ultra lightweight thread. My car is 6.25lbs RTR and on 5s/1400. I only burn about 125mah/minute with that setup which means I could probably complete a 20 minute main with a 5s 2650 pack.

5s and 6s are much better on the ESCs and batteries though.
Edumakated is offline