Just upgraded my firmware to 0119stock. I was using these setting on 224
4 = 7
9 = 30degs
10 = turbo ramp 9deg/0.1secs
12 = 20deg
13 = 2000rpm
14 = 0.2secs
15 = timing acc 750rpm/deg
I run a nosram x11 Storm Evolution 10.5 motor in a schumacher mi4 with a FDR of 7.6 on a medium sized carpet track with a 50ish meter straight and normally a tight infield. Ive put theses setting in for 0119 as a start point. Anyone have any suggestions of anything i should change before my first run. Thanks