Hi!
I use some cnc cut 10mm tool to put inside bearing more,
and now:
- outside is 5x10x3,
- inside is 5x10x4,
- hex is from yokomo: bd-011c (5mm) or nr graupner: YBD.011C,
- spec-r bd5 double joint axle
Need some work on c-hub to fit it, and I will squeeze tc6 diff, it is a little slop,
or put Y bd5 gear diff to front with 100k oil
Anyway, works, from slow rpms to high without big shaking
Also I wait very long time for ae factory to do own axle ...
tool: