New software setup and tests on a XERUN-120A-1S ESC running the new 110119 stock software in 21.5 Touring car class.

Well the results are in. Run tonight at a local track SERCCC (Melbourne Australia) on a flowing track setup. Three speed portions and four tight/hairpins sections.

Michael Clarke (driver)
Car - XRAY T3 2011
FDR - 4.91
MOTOR - SP21.5 V3 SET TO ZERO DEGREE TIMING (Second motor used, first was fried due to incorrect settings)(blame the pit dude (me))
BATTERY USED - YUNTONG 5000 40C
TYRES - Muchmore 32 premounts
RADIO - Futaba 2PL
BODY - HPI MAZDA 6
CAR SETUP - Kit standard with a change to droop on rear

SETTINGS USED ARE LISTED BELOW.

1 = 1
2 = 0%
3 = 3.4V
4 = 9
5 = 100%
6 = 25%
7 = 0%
8 = 6%
9 = 35
10 = 18
11 = ENABLED
12 = 24
13 = 4000
14 = 0.3SEC
15= 500

Results were explosive acceleration and great top end culminating in a comfortable heat win. Motor temps stayed around 55 degree and all but driving incidents did not add more wins to the tally.

I'm very impressed with the new software and with a little more track time i'd say a few more tweaks on setup will produce more impressive results. Only the driver has to now improve.

Hope these setup options will be of help to all.

Cheers

Ren