Originally Posted by
Lilhill
I tested the settings one at a time and the laps got faster and faster and these settings put me in the A-main at our nationals. Speed on the straights were good but just needed a little more punch. But you're right, I think this can get faster, I just don't know what to do to make it faster. I have considered testing the motor timing, but I know that changing this can cause seriously changes to motor temp, so wanted to know if anyone had some experience on FDR and speedo settings when changing the motor timing =)
(1) 10* timing on the SP V3 motor...give it a try, I never used the stock 5*..always max.
(2)
http://www.speedpassion.net/uploadfi...oAsphalt_2.pdf
(3) Checkout this page for other setup...don't know exactly the size of your track but we have setup from 35 x 70 small carpet, to 125 x 275 1/8th on road track...just go thru the setup and try them.
http://www.speedpassion.net/us/escsetup.asp
* PS...remember, when using the new 101212STOCK software on 17.5 or 21.5 motor, item #13, option #1 is actually 1800 rpm...please read thru the write up and adjust the setting accordingly.