Thats what I was thinking. I have the same problem with my pan cars. I use a mini digital Futaba, and it just won't center up! I've never had the problem on my gas cars (1/10, 1/8) using high-end KO servos. Make sure the servo horn fits perfectly. There should be no slop in the horn before you tighten the screw. Properly set up, (which it looks like you've done) these cars should track dead-nuts straight.
Let us know what you find.
-Steve
Originally Posted by
ralphierace13
i have the same problem what i have come to learn some servos dont center and they jump just alittle but enuff to make one of your toes left or right toe go from out 1 to out 2 i come to realize this so what i did was figured out which way it was jumping either to left or right and offset the toe so the car goes stright without using the trim, if u leave the trim like that and try to do the toes same shit happens and u have to trim more so watch your servo when u plug it in u see it jump around,,, hope it helps