R/C Tech Forums - View Single Post - Timing and FDR ...
View Single Post
Old 01-23-2011, 05:59 AM
  #3  
cyclone speed
Tech Addict
 
cyclone speed's Avatar
 
Join Date: Jun 2008
Posts: 621
Default

Originally Posted by Dragonfire
Basically they are running a setup with their power system that yeilds higher top speeds either through more timing, more gearing, or both. With modern ESC's you set "dynamic" timing levels which means a maximum amount of timing. You may not always use the set amount as it will vary as defined by other settings. Motor timing is fixed and you will have that setting with its advantages and consequences at all times.

Now about your ESC settings... All the various speedies need different gearing when compared to each other using the same motors. For this reason you are better off chasing a good ESC setup and FDR from the SpeedPassion or Hobbywing threads. 1/2 the people that reply to this thread will probably just tell you to buy a Tekin.
Ok, so il try that again.
So from what I understand, the ESC timing doesnt affect power at all ? It's just there to set a limit to the max timing ? Am I getting you right ?
What would be the best way to gain abit of top end and compensate with the torque ?
Cheers
cyclone speed is offline