Originally Posted by
powerprogoose
Hi, I'm fairly new with R/C's. I just bought a new ezrun 9t brushless motor with ezrun 60A ESC. I installed it to my Tamiya with the ESC in the ch2 of my receiver. I was able to setup my transmitter with the ESC by following the instructions on the manual. My problem is that when now when I turn on the RC, the wheels would go all the way to the left, even when i trim the transmitter all the way to the right, the wheels are still towards the left a little bit. The Throttle is fine, it goes forward, brake and reverse. Another problem I have is when I steer the transmitter to the left, the car would move forward even when I have the throttle on neutral. I'm out of ideas. Please help.
Are you turning the car on before the transmitter? Could be the reason the wheels shoot to the side when powered up. As to the other problem maybe try setting all the steering and throttle trim and endpoints back to neutral, rebind the transmitter and start again. No idea why the car would move forward from steering unless the plugs aren't in the right spots in the receiver. Good luck.