Originally posted by Bandeira
Mine is just like this... and I have two problems with it....
1- after about 20~30 minutes, the ".15 NS" gasket gets destroyed and I get some leaks...
2- If stock, this would give me about 106mm of pipe lenght... which is too much, but then if I remove some material I can get 102mm, which is still too much, and the coupler touches very little of the manifold, so the zip-ties have very little space to get it tightened....
cheers....
I dont know if you have ever seen these but they do work well when you want to cut header lenth! PART # GSCMA15BL 1/10 "J-TYPE" Coupler-blue GS racing