Originally Posted by
YZFAndy
I've got the 4 dot insert in the can which is -10 degrees but i'm guessing its still got at least 30 degrees of timing on it!
What amount of timing have you used with what turn?
I'm sorry, i have very little experience with LRP motors. A friend asked for help once, because he had 4.5T X11 in a 4x2 buggy (dont ask about that!) cogging and overheating. I set the timming to 8º and it is was perfect.
I have no ideia for the 13.5T motor, but i would start at 15º or less and test from there.
Don't forget to adjust gearing when you change the timming
