Originally Posted by
Casper
It is to help lower the shocks to reduce CG.
No they will not work on the CR. The 22 uses all metric hardware including hinge pins. The outer arm area where the spindle attches is totally different as well. Don't know about over all length but guessing it might be different as well.
Yup thats what I have read
Does it do anything with the suspension geometry by bringing up the hubs making the wheels as high as the diffs, sometimes higher when on bumps
what about the turnbuckles, it should be higher on the hubs too increasing the roll center (?)
or was it just makes it possible to use longer big bore shocks
thanks