Originally Posted by
Bmr4life
That vinyl is awesome.
BTW, the vinyl is XXXMain Ice internal graphics.
Originally Posted by
Lars in Norway
The problem about this leaking, is this mostly about the centerdiff? I see there is some sweating on mine, so i think i will try to sand it and do the stuff that has been done here by others
Lars, when you sand the diff, ensure that the surface you're using is very flat. I used our kitchen counters since they're granite. Sand a little, then check. You'll see that the area you've sanded is matte looking. The areas that have not been touched by the sandpaper will still be a bit shiney. Keep going until the entire mating surface has a matte look to it. I'd start with 400 or even something a little rougher. 600 seemed to load up with the plastic too quickly. I'd say once get get everything nice and flat, finish up with 600.