Ran mine on carpet last night, after some setup work it was competitive with the M05's. I manage fastest lap with it, the car was not as forgiving my M05.
Needed more attention when driving as the car was more on edge. It has better traction out of corners and almost launch control like speed off the line to escape the first corner mayhem.
Setup like this...
Front tires : Xpress mini foams 26 shore
Rear tires : Xpress mini foams 30 shore
Front camber : 1 degree
Rear camper : 2 degree
Toe out front : 3 mm
Rear upright : 1.5 degree Tamiya alu
Front Tamiya M05Ra uprights
TRF black limited dampers with blue springs front and yellow rear
300 Tamiya damper oil, placed 1 o-ring under spring cup rear.
3mm ground clarance.
3racing ball diff with Tamiya thrustbearing and ceramic balls.
Tamiya universal shafts.
4mm alu wheel hub adapters
No extra weight placed in car what so ever, and running lipo.
Ezrun 35A with 3000kv/13T system.
Servo : Futaba S9402
Body : Tamiya Honda S800
I did manage to win 3 races with it, so overall the car has alot of potential.
The other racers had a good look at my car and might get their own now.