Originally Posted by
HyperTT
I'm in the process of doing this on mine, you'll also need the kingpin screw set p/n 37220. You need to clearance the diff a little to run the bar on top like it's supposed to. It just barely clears the upper brace if you use the right shims. I'm also in the process of purchasing the servo saver tube and spring from the scrt10 i think it will help align things a little better, right now it has an angle to it because it sits about a mm lower with the stock tube.
I have one question for you, how do you have your top plate shimmed? I had to shim my top plate up 1/4" to clear the rack! If not it hits the top plate and binds up like crazy! Then when shimmed up theres almost 1/2 the normal throw.... IDK id I did it right... I used all the parts listed...