Originally Posted by
BCbud
Good day!
Here are some pictures of my car with the latest configuration. I have moved the servo to the left hand side, to do this I had to rotate the bearing holders for the steering servo saver 180* so that the steering arm would clear the bulkhead on the left side. Because of this both diffs had to be fliped over so the belt would clear the servo saver.
The care is ballenced from left to right. The front end weights in at 702g and the rear end is 695g. I have one 7g weight on the rx to ballance the car. All weights are with the body on.
wow, that is about 50 -50 front rear !