Originally Posted by
bigmatt
it will work but rec. MC8 plug (McCoy)
thats a pretty hot plug for a big block engine , i would also recommend something a lil cooler such as a mccoy mc8 , odonnell 99 or 100 , OS A5 i believe is what you need if you are supposed to be using a short plug .
tip: you can use long standard plugs in short standard buttons by using two copper washers instead of one
btw , just install two washers and run this weekend , be careful and pay attention to the engine , if it starts runnin funny then change the plug , mccoy mc59 plugs are notorious for letting the filament go and having it fly through the engine