R/C Tech Forums - View Single Post - Hyper TT 4wd 1/10th Truggy Thread
Thread: Hyper TT 4wd 1/10th Truggy Thread
View Single Post
Old 12-31-2010, 10:28 PM
  #1417  
Cappy
Tech Master
iTrader: (16)
 
Cappy's Avatar
 
Join Date: Apr 2005
Posts: 1,319
Trader Rating: 16 (100%+)
Default
Originally Posted by Cappy
Both front and back diffs binding ? check and see if the pinion gear has play back and fourth if so just have to reset the dog-bone coupler on the pinion.
After rebuild mine are making the same noise as before rebuild but no binding.
Originally Posted by redthunder
righto, will do, ill recheck everything when my skid plates arrive in the mail, argg its so boring just waiting on parts, atm its still just a rolling chassis with a battery and a motor in it, cheers for the tips

Ok after redoing the front one and putting this thing all back together i found out that i had the same exact prob as yo mentioned. So i took it all back apart again to loosen (ever so slightly) the screws that hold the main spur to the diff cup. it seems if they are too tight it my bend the spur a bit
Cappy is offline  
Reply