Originally Posted by morgoth

Btw, I forgot to mention some more about the timing. If you wanna change the start and end rpm. Choose timing profile C1 or C2. That are custom profiles that let you choose you own start and end rpm.

Start rpm: The moment that the extra timing is starting to kick in.
End rpm: The moment that you have the full extra timing that you choose.

For example you set 30% timing and 10k start rpm and 20k end rpm.
0-10k rpm: 0% timing
10k rpm: Timing kicks in
10-20k rpm: Timing keeps increasing until you reached 20k rpm and then you timing will be 30%. So when your motor is spinning at 15k rpm you should have about 15% timing.
20k-max rpm: 30% timing

I hope this clears up a few things.