Originally Posted by
XCELL
For those of you attending the DHI cup what set-up have you come up with for 17.5? I am going to be practicing this weekend and start with Hara’s 17.5 from the IIC and tune from there.
Thanks,
Patrick
Originally Posted by
Nilks
I am going to attend DHI Cup, and I have used the SP V3 17.5T through-out this winter-season.
My experience is that is can handle a lot of timing, but it also needs a lot of timing to go fast. I think Hara's setup will be good. My setup is a bit extreme, and keep an eye on the temps if using mine (my motor is only getting 57 deg celcius after 6 min, but I think that it can get hotter on the larger DHI Cup track).
My setup:
Boost: 50
Start: 5.000
End: 15.000
Turbo: 15
Delay: 0.25
Ramp: 3.0
FDR: 5.7
Motor-timing: 10
Hara's setup isn't as extreme, and is very smooth. So it should be a good starting point. I would recommend you to use 10 motor-timing - the SP V3 really comes to life when using 10 on the endbell.
tryed nilks sertup yesterday, and changed a bit
boost 50
start 2800
end 12000
turbo 15
delay 0,2
ramp 2
fdr 5,6 use as small spur as plausebul
motor timing 10
motor comes off around 70 degress celcius.