View Single Post
Old 12-08-2010, 08:01 AM
  #629  
JamesReilly
Tech Addict
iTrader: (58)
 
JamesReilly's Avatar
 
Join Date: Aug 2008
Location: My Lab
Posts: 600
Trader Rating: 58 (100%+)
Default

Originally Posted by sprintcarracer View Post
I am curantly waiting on my evo conversion to show up and I see there is a new chassis! So my question being for stock racing/17.5 will the old chassis be the way to go or will the new flexi be the one to go with?

The standard chassis is very good, you’ll want to run a slightly softer spring and possibly a slightly softer sway bar like 0.1mm then what you would run with the worlds chassis. The worlds chassis has been talked about for alittle while, I was simply letting people know that has become available.

As for the weight in the front there is plenty of room right behind the arm mounts and you can cut down some lead weights to fit under the spool up next to the bulkhead.

Also I very much agree photon setups do not work the same on the EVO. as they do on a photon chassis. I'll try and get a setup posted but it will be most likely after the weekend.

Best regards,
James
JamesReilly is offline  
Reply With Quote