I've had 4 of these CC2200s setups, 3 in a box from Castle and one in a Flux. They were all ready to run lipo but the autolipo setting of the lvc was not where you'd want it to be. All mine had it a 3.ov/cell which is too low. I reset mine to 3.4 or 3.5v/cell depending on the RCs weight.


I think what you're saying is that theMMM lvc was set to off on your ERBE in anticipation of running NiMh. You don't use a lvc running NiMh.

Castle has added an option for setting their escs - you can get a Field Programming card and don't need a PC - it'll let you do most things the Link will do, you have to have the Link to do custom throttle and brake curves.