Caution with cranking down on the servo saver, if you are using a good servo, your saver will break.....
Not sure the steering mod is going to add more steering, I believe it's gear more toward eliminating the play on the steering assembly... Other than that the only other benefit I could see, is that you can easily adjust your ackerman angle, oh and yes you eliminate that flimsy wire thingy....
I'm enjoying my truck now, much more since it's first outing, truck handles great, and when I ran Hole Shots M3 there was a huge improvement over the stockers, my only gripe with them is that the stock ofna foam breaks down way to quick....
Current set up:
Diffs 5-5-2 (going to try 3 in the rear, I still have a little too much rear traction)
Shocks 40wt Losi front/35wt Losi rear
Front Shock Location stock
Rear top shock location out on the botton row
Here's is the crazy part Toe Out -4 degrees (Probably where all my steering is coming from)
Top front arm spacers back
Botton front arm spacers front (least amount of caster possible)
Camber -2 all the way around
This is the latest video of friday night, mine is the yellow with red: