Originally Posted by
1Fastpede
need some help with setup
my set up is this MMP/13.5ballistic
FT b4.1
MMP/13.5ballistic
-1camber all around
30 degree castor's
.5hubs 2.5 toe block /2.5 anti-squat
brown front/ green Rear springs, 30wt all # 2pistons all
geared 28/75
18degree timing on ESC from 6000-50000
Groovy/double-dee's
loose ball diff
medium wheelbase
everything else is FT set-up
the problem is i need to drop 1 more second off my lap times. or id be happy with .5 sec. I'm just as fast as the quicker guys down the straight and through the jumps. so i'm thinking my corner speed needs to be more.. anyone see anything wrong with my set-up? go to 0 hubs? more/less timing? i'm temping at 110 on motor/esc
indoor clay
whats everyone running for Castor blocks? 25 or 30? also what rear hubs? and toe block?
First thing I see wrong is your timing...6000-50000!?!
Try 5000 to 20000. Your 13.5 will never see 30,000 rpm on 2S.
I'm suprised your running that hot aswell. Mines temping 90 degs with 40 degs of boost using a RS/13.5 Orion with the same gearing. Stepped up to a 32 pinion for next weekend, see where I'm at after that.
Proline Scrubs are the hot front tire locally atm...I'm running Holeshots on the rear of mine, I've tried Switches Clay/Soft, blue Barcodes, M3 Calipers, green Goosebumps so far...