Originally Posted by
lee596
Yeah I have the cells right. Im charging my other lipo just fine right now. I think he didnt charge it then I ran it 2-3 times with out charging thinking it would be ok but the car just stoped responding so I think I drained it too far. The thing I really dont understand is how to you be sure at what amps to be charging at and also on my charger on the nimh setting it has a volt reading on the lower right hand side as its charging. Is that the volts of the battery u are currently charging or the cut off volts. Im not sure what to set it at?
If your chargin a lipo receiver pack a safe bet is to base it off the mah of the pack itself, if its a 1500 mah pack charge at 1.5 if it's 2200 mah 2.2 amps etc. The volt reading on your charger is most likely the amount of charge the pack is currently at, cut off is only used to program speed controls so the pack isnt taken to low. If your settings are right and it's reading low voltage I'm guessing thats a safeguard telling you the lipo pack has been discharged to low and it's probably unsafe to charge it.