Yes, I understand. Thank you very much for this information. Do you know if setting the Throttle to SHR mode will allow a faster response time? I mean, faster than the Normal mode. I'm using the Mamba Max Pro ESC and do not know if switching the Throttle to SHR(on the M11x) will make any difference in how quickly the ESC responds to the actions/signals from the Throttle and Brake of the Transmitter.
Originally Posted by
ganymede
The 'Display Mode Only" indicate that particular function can only be set in Display Mode Only.
To get to Display Mode, turn off your TX via the slide switch on the side then turn on the Display via the Display slide switch on the lower left of the screen, wahla! You are in "Display Mode"! Note the Blue LED is off indicate that you are NOT transmitting...
In a nutshell, certain settings CANNOT be change while you are transmitting and have to be set in Display Mode...
Hope you understand...