R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 11-11-2010 | 12:58 PM
  #12680  
grizz1's Avatar
grizz1
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Originally Posted by xtreme888
Hiya...thanks will set carb as mentioned. Will try a nova header with the pipe. I do normally run a sirio AAC onroad but since running on a smaller technical track over winter as nationals finished. Hence decided a gx 5r as read alot about it
It will be an interesting experiment - let us know how it goes. The punch of the 5 Port might be a little hard on the drive chain, but it won't be slow off the mark !! If it's a really tight track with no long straights it might be cool.
I was picturing you running it on a full size track, where I think it would lack the top end to be competitive.
I guess my main concern was people bagging the motor on here later, when it was being used for something it wasn't designed for or intended for. Just me being paranoid, but you know how it goes on these forums sometimes

Last edited by grizz1; 11-11-2010 at 04:45 PM.
grizz1 is offline