Hi Martin tks for the reply.
My temp cut off is set at 115 as you suggested. Would you see an advantage if i had to increase the the timing up another step? All I'm after is slightly more punch out of the corners.
As regards to Sonters settings i can tell you that his fixed timing is set to 27 and max to 28.
Tks Gus
Originally Posted by
Martin Hofer
5.5 is definately undergeared, 4.9 sounds more like it.
the motor shall NEVER scream! more rpm means more heat! and less power and punch!!!!
so always go for the hardest gearing you can without the thorttle efeling getting spongy
91° sounds like you have left the motor temp cut-off at 100°C? there's a reason why I said set it to 115 for the gm motor ...
@ sonter, I hope you realize that you have to push the button shortly after each run beore switching off the speedo in order to have it save the motor temperature !
how much fixed timing are you running?
I think you should try gearing harder aswell.
if you have "highspeedtiming with switchpoint" ticked, try unticking it.