R/C Tech Forums - View Single Post - RACE READY HPI Vorza Flux 1/8th Scale Buggy with Hop-ups
Old 11-02-2010, 04:17 PM
  #1  
HYDE16
Tech Regular
 
HYDE16's Avatar
 
Join Date: Nov 2009
Posts: 407
Default RACE READY HPI Vorza Flux 1/8th Scale Buggy with Hop-ups

I'm listing my 1 year old HPI Vorza Flux with electronics (stock high torque servo and stock radio), Maxamps hard case battery, custom body, wheels and tires and hop-ups.

The buggy comes in full race trim with a ton of research and testing behind the current setup. The shock oil, springs and differential grease have all been changed out based on my custom setup chart (see below). The ride height, droop, camber and toe have also been set based on my custom setup chart (see below). It has been meticulously cleaned after each race.

This buggy is an animal, it can be bashed or raced; on road or off-road, fields, tracks, pavement, etc.
This buggy has gotten plenty of praise and great reviews in the RC Magazines and in the forums. This particular Vorza was in RC Car Magazine under the readers rides over this past summer!

Upgrades:
DE Racing Skid Plates (with extras)
Full Spring Kit
Captured Hinge Pins
Aluminum Servo Arm
Pro-Line White High Downforce Performance 1/8 Wing Kit
Kyosho closed end wheel nuts
Pro-line Wheels / Caliber M3 Tires
Pro-line Wheels / AKA City Block Tires
Stock Wheels / Bashing Tires

Body:
Kyosho MP9 with custom professional paint
http://www.rctech.net/forum/7114637-post1253.html

Battery:
Maxamps Hard Case ROAR Approved 5250 4s 14.8V battery
http://www.maxamps.com/Lipo-5250HC-148-Vorza-Pack.htm
This battery has been extremely cared for, charged completely come race day, used in 2 heats then put right into store mode

Unboxing Pictures:
http://public.fotki.com/JacobsRC/dir...pi-vorza-flux/

First time on the track:
http://www.hobbytalk.com/bbs1/showpo...postcount=2878

Race Rebuild Completed:
http://www.rctech.net/forum/7219372-post1557.html

Action Pictures:
http://public.fotki.com/JacobsRC/dir...10/page11.html

ESC Rotation:
http://www.rctech.net/forum/7082205-post1092.html

Captured Hinge Pins:
http://www.rctech.net/forum/7173766-post1475.html

R/C Car Magazine's Ve8 Review - Setup Sheet :
http://www.rctech.net/forum/7054745-post973.html

Setup Chart:
http://www.rctech.net/forum/7133783-post1362.html

Servo Chart:
http://www.rctech.net/forum/6997015-post752.html

Price = $600 SHIPPED!


Last edited by HYDE16; 11-11-2010 at 01:50 PM.
HYDE16 is offline