R/C Tech Forums - View Single Post - 8T 2.0
Thread: 8T 2.0
View Single Post
Old 10-28-2010 | 02:34 AM
  #9888  
TIX's Avatar
TIX
Tech Master
iTrader: (17)
 
Joined: May 2008
Posts: 1,975
From: Melbourne Australia
Default

try running a lower front ride height and 3-B on the front camber links
also make sure your front wheels are not locking when you break
i use that and get heaps more off power steering

if you use the 3-B camber link just check that the ball end doesnt rub on the top of the carriers near the king pin. sometimes you have to file a little bit off the inside edge of the carriers
TIX is offline