Originally Posted by
losi_racer
You are very impatient. As i stated and many agreed try different set ups, just because a set up says use this doesnt mean its right for you. Try different things. You can always cut the links if you want short camber links. if i were you i would try B/1 that would be my starting point and alter your settings from there
well i did mount the link into the #1 hole but it says on the 1.0 t manuel that using the #1 hole is good for high traction surfaces well most of the time my track is dry and dusty so it doesnt have the best grip .
i guess i could use the #1 hole on the tower i do have new rear tires i-beams soft.
im not impatient im just getting aggerated in why i cant use the lower holes on the tower with the 2.0 rear hubs .
i did, use the 1.0 rear hubs with the link on the (a) hole on the 1.0 hubs and the #4 hole and it was fine but i got tried of bending the rear hub hidge pins.