Old 04-08-2004, 06:52 AM
  #3  
antoniop
Tech Regular
 
antoniop's Avatar
 
Join Date: Aug 2001
Location: Lisbon, Portugal
Posts: 371
Default

That's the rigjt one.

Since our lathes use the cutting bit facing down, and in your case the bit moves from right to left you need an AL bit (L means left, but since it's mounted "upseide down" that's the correct one)

You probably need a little shim (included with the lathe) under the bit. It works perfect.
antoniop is offline