R/C Tech Forums - View Single Post - More bottom end on V-Spec
Thread: More bottom end on V-Spec
View Single Post
Old 10-20-2010 | 05:55 PM
  #1  
Nesal
Tech Adept
 
Joined: Jun 2010
Posts: 158
Default More bottom end on V-Spec
Hi Guys!
I would like to get some more bottom end power out of my V-Spec, it has five and a half gallons on it and Im running a JP-4 pipe (this is probably the main problem, if so please recommend a different pipe, dont really want to spend the 100$ on the OS 2050/60), Dynamite max life aluminum shoes with 1.1 springs (dont think I can get more bottom end here...).
It gets very good power when on the lean side, properly tuned around 230F it gets decent top but very little bottom. I will be getting it repinched soon once I get a new Werks B5 so if that might be the problem I may leave it as is...
Thanks!
Nesal is offline  
Reply