Hitec HS-5625MG $55
Speed: 0.14 sec/60 degrees at 6.0V
Torque: 130.53 oz/in at 6.0V

Futaba S3050 Servo Digital Standard High Torque BB MG $50
Speed: 0.16 sec/60 degrees at 6V
Torque: 90.2oz/in (kg/cm) at 6V

the hitec is pretty tempting...


the analog ones are cheaper.


Futaba S3305 Standard High-Torque Servo w/Metal Gears $35
0.20 sec/60 degrees at 6V
124 oz/in (8.9 kg/cm) at 6V


Hitec HS-625MG Servo Speed Metal Gear S/JR/Z $37
0.15sec/60 degrees at 6.0V
6.8kg-cm (94.43 oz/in) at 6.0V

what do you guys think? im trying to keep costs down to as low as possible without sacrificing potential. if its really worth it should i just go for the $90+ servos?