Originally Posted by
kyosho17
Well iam not tha nova 70ss but I talked to axe main distribitor and he says if there is a new motor it will be released in feburary as reguards to the black magic he did not have any but will try to get some to us. Yall may already know this but iwill say any way the mamba has the same bore and stroke as tha magic and the pistion and sleeve from mamba will work if that helps any
I have tried the momba Piston and sleeve in my blackmagic's
but the pinch is so tight and the fit in the case is hard on a few
i have adoptied a new way " i use the orgional sleeve with a new piston and it seams to work very well
" i get about 6 to 8 gallons on this method before a new piston is required.
rod's are still a issue i have been soft sodering around the lower bushing and polising the new rods before install "has seamed to help also"
I'M IN THE LAST STAGES OF TESTING THE NEW ROD
I HOPE IT WILL STAND THE TEST OF TIME AND PUNISHMENT "BUT ONLY TIME WILL TELL"
I ALSO WOULD LOVE TO SEE A BLACK MAGIC/ SILVER ARROW ENGINE IN THE LINEUP WITH SOME NEW UPDATES