R/C Tech Forums - View Single Post - RcRenew.com engine resizing and epoxy crank re-filling
Old 10-14-2010 | 04:56 PM
  #243  
Do-Over's Avatar
Do-Over
Tech Addict
 
Joined: Jun 2010
Posts: 513
From: O-H....I-O
Default

Thanks buddy,

I hate it that you had to right all that out on my behalf but I appreciate it all the same. I understand the tolerances and why they have to be so perfect. I used to race 2 strokes and have done my share of rings and/or complete rebuilds in the garage, usually twice a season. I can usually get what I think is a good tune on 1 needle or the other but believe I may run a lean top that disguises a rich bottom or vice versa. It's that balance for the sweet spot that evades me. I think I just need more time to develop a better "ear" for this. I can get decent run times and steady temps also but my engines still don't sound like the pro's at the tracks I go to but I can be patient and work up to that. Thanks again for your time and I apologize for the lengthy nonsense, I'm just a talker I guess...
Do-Over is offline