Originally Posted by
jewn_beef
wanting to get aluminum rear hubs but which do i get pitpop if you could chime in it would be appreciated i think that cody and pavidas are running the +2 offset hubs with the inserts in arms on the inside position so overall width is the same. if this is correct what characteristics just this change for the car more or less traction if any or handling on different conditions thanks for me upgrade parts are a big hit to the bank so would like to get your input before buying them or the original standard off set ones thanks in advance also r u guys running full rebound in your shocks thanks
Hi Jewn... we are running nearly full rebound, just enough droop screw to take the load off the shock when it's down all the way... as far as the 2mm offset hubs go, the shorter lower arm should be more consistent and effect the roll center in some way that would take a computer generated simulation to fully understand
. As far as cornering and such, I don't think you will notice a difference as event he top guys haven't noticed a profound change.