R/C Tech Forums - View Single Post - She's got too much captain!

10-11-2010 | 01:06 PM

#9

Locum51

Tech Regular

iTrader: (12)

Joined: Jul 2009

Posts: 444

From: Northern IL

Quote:

Originally Posted by jwm2

Try another plug and see what happens. You might be rich on the needles and that could be the cause of it flooding, i'd lean out the hsn just a tad and see if that helps.

NORMAL NEEDLE SETTING
• MASTER NEEDLE - HSN) 4 TURNS OUT
• LOW-END(BLK) NEEDLE (LSN) -3 TURNS FROM FLUSH
• MID/LOW-END(BRASS) NEEDLE - NO TURNS

I've tried the stock or reset to normal running, and then adjusting from there. And what i've tried on the HSN is from 4 out all the way down to 2.5 out.
As for LSN, i've tried from 3 down to 2.5. I always double checked i was primed and that the plugs were glowing and now i'll try stripping it down and cleaning it and rebuild it to see if that helps.

Would it be okay to use a little bowl of the fuel i'm running to clean them in or what do you recommend cleaning the internals with?

Reply