R/C Tech Forums - View Single Post - how to properly oil outer air filter foam
Old 10-11-2010 | 08:57 AM
  #12  
Charles Godwin's Avatar
Charles Godwin
Tech Master
iTrader: (2)
 
Joined: May 2005
Posts: 1,136
From: UK (England)
Default

Oil the filter up with a few drops here and there on the foam (inside and outside). Put in a bad and squish the foam and try and move the oil all around the filter. If you see a bit that hasn't been oiled just add a drop at that point and repeat. Once done wrap up in some tissue and squeeze all the excess out. You'll have to do this about 4 times depending on how much oil you have used.
Charles Godwin is offline