Originally Posted by
NitroXray80809
On my Dynamite break in i got a lil over a half of a gal on the exp and with plug out i sitill have a little resistance, so im not 100% past break in but with plug in its got a butt load of resistance but i dont need a heat gun to crank it now. I just raced it friday with 2053 and loved it. I ended up actually winning and coming off a 10 min race at 207, it had alot of power and the pipe did good, im sure another pipe will do better but i got 7+ mins on a tank still running really fat considering once i get about another 3/4 gallon through it i will see what it does at about 240. Not ganna go 250 which is what alot of people say run it at but im confadent that i found my engine im ganna stick with and thats DYNAMITE! Alpha also very nice i might try it next.
i can tell you right now if you run it rich you will break a rod alot quicker, running rich wont make your engine last longer, it will shorten the life of the engine just like it would running it lean, dont be scared to get it hot, i dont use a temp gun for that purpose, i temped mine this weekend and i was coming off at 270-275 and it was tuned perfect. but like i said running it rich is bad for it too!
