Hey averagejoe's.

Are you the RC track just off the 401 near the pirate ship?

I recently bought a fasst module and receiver for my 3pk used so it came without instructions. the way I bind the receiver to the module is I first press the bind on the tx. the led will begin to flash. i then press and hold the bind on the rx. the led on the rx will flash for a while then turn solid. at this point let the bind button go...it is basically bound to the tx, but the tx fasst module led will still be flashing. I just turn the tx off then back on for the led to go solid and everything works as it should. worked for the 9 other 603fs i then bought afterwards for the rest of my rc arsenal.