Thanks for the tips guys! I did glue the sidewalls, but heres my setup as of right now
Front:
springs: white
Tires: 42 shore
Camber Link: inner upper
Rear shock tower
Shocks in middle hole on tower, outer on arms
60 wt. oil, w/#2
4* blocks
3mm spacer under ballstud
ride hieght 5.5
camber: 2
Droop: set to touch spring while in the air
Rear:
springs: yellow (tried purple too)
Tires: 37 shore
Camber link: inner upper
shocks in middle on tower, outer on arms
40 wt oil w/ #2
R+3+2 block
camber: 2
ride hieght 5mm
Droop: set same as front
Its pretty much the same as Ariels, but I didnt get a chance to get the F+3+0 blocks.
Also someone told me try the F block on the inside rear instead of the rear one? anyone ever tried this, he said its supposed to feel a bit more free in the rear end
Any help is greatly appreciated
