Originally Posted by
mist467
The pod is not even either. I am at a loss. What could cause this. Im new to 1/12 scale but i cant see what im missing as there isnt much to it. Thanks for the help in advance guys
Pull the left and right bulkheads off the pod, and detatch the lower pod plate from the chassis. Place the pod plate on a piece of glass, and make sure it's flat. If it is, check the left and right bulkheads on the glass to make sure they aren't bent. A bent left or right bulkhead can tweak the lower pod plate and cause the issue you've described.
If you find nothing wrong with the pod, check the chassis on glass to make sure it's flat.