Originally Posted by mist467

Hi guys. First off lots of knowledge and good stuff in hear. Thanks for that. Got my first 1/12 going a gen-xl. Im having a wierd problem though.

The car wont give me the same ride height right to left. The front will be level but once i start going towards the back of the car one side is lower then the other by about .5 maybe even almost 1mm. I have checked and double checked everything and gone nuts looking for a explanation.

Things i have checked

Front ride height spacers and rear ride height adjusters are correct and match.

Tires are equal from left to right. Ive even tried with new tires not trued that are perfectly even.

Car is not tweaked even though i dont think that would make the difference.

The problem gets worse as it go towards the rear of the car.
The pod is not even either. I am at a loss. What could cause this. Im new to 1/12 scale but i cant see what im missing as there isnt much to it. Thanks for the help in advance guys