Originally Posted by
RC-ProSpeed
Thank you for the replies, we starting to form the class so it will be on the low cost racing with
Silver can mabuchi motor, so we will not be reaching high speeds
The track is on a parking lot with medium traction
RC F1 Flex T-Bar - F103 Chassis Item #53169 Soft tbar-you might have to look on ebay or an Asian shop.
The RM will be fine since it's fiberglass, you'll be able to use the traction. The long fiberglass upper deck is something you want to look at if you feel like the steering is a little too dead. The pivotball suspension works well outdoors. The oring suspension works well too, but I have seen both work outdoors. Indoor, oring all the way. The Tamiya premount tires work, or a 25 shore for the rear and maybe 35 in front if you can get Zen tires or similar. Black or gold springs up front, with 20,000 on the king pins. Rear 25-30 in the shock, red spring or even lighter (the florescent minicar springs are lighter). 10,000 on the damper plate. White paragon on the tires, full rear, 1/4 front, cover the paragon with sunscreen when it soaks in (10 min).