Originally Posted by
kusal
Hi all,
I have a XeRun 60A V2.1 in my Yokomo Bmax4 together with a Ballistic 7.5 with a roll out of 9.0.
Speedo and lipo are around 40°C and motor at 62°C after a 8 - 10 min run on an Astroturf track.
Software is V1.10_091218a_t which I think is an old version (version 27).
Punch is at 5 and timing at max.
I would like to have some more top end on the straight, smoother acceleration (more lineair) out of the corner, better brakes and cooler temperatures of the motor.
Which software version is advised?
Probably a lot to ask for but it is not really clear which are the best softwares per application.
Thanks in advance.
PS: I also posted the same question in the XeRun 2.0 thread, but it looks like this tread is more busy!
You have the original software on you speedy and need to update to the newest version. Find Cherry Blosts video earlier in the thread and folow this to update yokur speed controller and update box.
Your temps are fine. If you want to run very conservative setttings you could try the 518 stock software but 528 mod would be your best option as you are running under a 10.5 turn which is the lowest wind recommended for the stock software.
If you want to run the stock software(518) turn turbo off and start at boost setting 5 and go from there.