R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 09-21-2010 | 08:16 PM
  #34567  
Pablo Diablo's Avatar
Pablo Diablo
Tech Master
iTrader: (3)
 
Joined: Dec 2008
Posts: 1,012
From: Sydney Australia
Default
Originally Posted by nashrcracer
started out with a 50mm ro and the motor came off 130 and the speedo was 130 the room temp was 85. went to a 51 on the second pack and it was still only about 130. put 3400mahs back in the pack. so I have more power I can use. so I'm thinking of going to the 55 and trying a 2 dot timing spacer. when I can find it. it's in the pile somewhere. play with that tomorrow.
I have run a 6.5, BD on profile 5 with a 60mm rollout. I would say you are waaaaaaaaaay off the mark. Especially if you are still on profile 2.
Pablo Diablo is offline  
Reply