Originally posted by rcruv
I've never tried to take teflon seal off.
Should I chip it off bit by bit?
to take a teflon seal off you have to take the C-clip off. you can see it when you look at the bearing, its is a little ring going around the top of it with a gap. Where that gap is you put your xacto knife under it and try to pop it out. When it does come out it will shoot somewhere far away, so try to make it fire into yourself so you can find it
.
then you use the exacto knife to GENTLY life the seal out.
thats all there is to it, and you can still reuse the seals.