R/C Tech Forums - View Single Post - Experienced Novak Question!
Thread: Experienced Novak Question!
View Single Post
Old 09-10-2010 | 01:01 PM
  #2  
G33Kster's Avatar
G33Kster
Tech Fanatic
iTrader: (11)
 
Joined: Jan 2010
Posts: 840
From: Bay Area, CA
Default
Originally Posted by XxE-ReVoRaCeRxX
Hey guys im installing a novak xbr into a rustler and had an issue.... I took the wire that connects the esc to the reciever and there is a problem. I dont know which way the plug goes on the esc. It is the red white and black wire and at the end is a plug and im not sure if it is supposed to have the side with the gold prongs showing half way facing towards or away from the esc and on the wire i do not know which end goes to the reciever?? There is an "8" on one of the sides....

Please help me...
It will plug in the same direction as your servo plugs in, usually with the signal (white) wire on the inside of the Rx and the ground (black) wire on the outside.
G33Kster is offline  
Reply